Sorry, product image is currently not available
EVSELECT Info
Sorry, product image is currently not available

The EVSELECT™ charging cable is compatible with every electric vehicle utilising the J1772 type 2 plug. Determining whether to choose the 16 amp version or 32 amp version depends only on the charger capabilities of each vehicle. Both 16A and 32A cables are compaitble with lower amperage chargers, because each charger automatically sets its maximum charging amperage capability. This means that both 16A and 32A cables are back-compatible for any charger amperage.

Here are a few examples of maximum available amperage draw, converted to kW:
 

 

Other Benefits

 

  Original 10A Charge Time Maximum W/h EVSELECT Charge Time Charge Time Decrease
Nissan Leaf 2013-> 10h 54m 7000 3h 25m @ 32A 68.8%
Nissan Leaf 2013-> 10h 54m 3650 6h 48m @ 16A 37.6%
Nissan Leaf <-2013 10h 54m 3650 6h 48m @ 16A 37.6%
Chevrolet Volt 4h 0m 3300 2h 40m @ 16A 33.2%
Opel Ampera 4h 0m 3300 2h 40m @ 16A 33.2%
Peugeot iON 7h 20m 3200 5h 00m @ 16A 31.5%
Citroën C-Zero 7h 20m 3200 5h 00m @ 16A 31.5%
Mitsubishi i-MiEV 7h 20m 3200 5h 00m @ 16A 31.5%

 


* The listed values are based on ideal conditions and theory. Real-world applications may differ within reasonable bounds based on various factors, including battery charger trickling, which slightly prolongs charging times, but also prolongs battery life. This depends solely on the car's charger and software.

Easy to use

The default setting is always the cable's highest amperage - 16A or 32A. If this amperage is the correct one needed, than there is no need to change the setting, you can directly plug and charge. If you need to set (lower) your amperage, just surpress the main button after plugging into the mains and wait for the LED to indicate the required amperage.
 


For example for 10 Amps, release after 10 red LED flashes and plug the J1772 into your EV.
The setting you chose is written into the memory and remains the same until the next time you change it. In case of a power outage and reconnect, charging will reset with the last saved value.
When plugged into the EV, the LED indicates two statuses:

Specifications

• Voltage: 230VAC ±10% (L+N+PE) 50Hz ±1%
• Charging current: 6-16A ±5% (16 Amp version), 6-32A ±5% (32 Amp version)
• Self power consumption: 0.6W (Idle) / under 5W (Charge)
• Cable: 6.5 meters heavy duty isolation, 2.5mm2 (16 Amp version), 6.0mm2 (32 Amp version and adapter)
• Power connector: Schucko (16A), IP44 (32A), we can supply other types, please ask
• Car connector: SAE J1772
• Ambient temp: -30°C to +40°C
All parts are CE and/or TÜV approved and rated at or above standards to ensure funtionality and safety.

Compatible vehicles

Nissan Leaf
Chevrolet Volt
Opel Ampera
Toyota Prius
Citroën C-Zero
Peugeot iON
Renault Fluence ZE
Renault Kangoo ZE
Mitsubishi iMiev (incl. 2014)
Mitsubishi Outlander
Kia Soul EV
and others...

 

Sorry, product image is currently not available
Sorry, product image is currently not available Continue Sorry, product image is currently not available
EVSELECT Facebook